This set incorporates two drill countersinks and matching plug cutters.|Plugs cutters are made from Tool Steel and are very slightly tapered.|Use on timber to drill a countersunk hole for a screw which is then plugged uses a plug/pellet made using the plug cutter.|Recommended that plug cutters are used in a pillar drill.
Specification:
D=3/8 inch|D=9.5 mm|D2=7/64 inch|D2=2.75 mm|No.10 drill/countersink|D=1/2 inch|D=12.7 mm|D2=1/8 inch|D2=3.2 mm|Shank Diameter=1/4 inch hex|Screw size=No.8|Screw size=No.10
1 x Drill/countersink for No. 8 x 9.5mm|1 x Drill/Countersink for No. 10 x 12.7mm|1 x Plug cutter 9.5mm (3/8 inch)|1 x Plug cutter 12.7mm (1/2 inch)
Specification:
D=3/8 inch|D=9.5 mm|D2=7/64 inch|D2=2.75 mm|No.10 drill/countersink|D=1/2 inch|D=12.7 mm|D2=1/8 inch|D2=3.2 mm|Shank Diameter=1/4 inch hex|Screw size=No.8|Screw size=No.10
1 x Drill/countersink for No. 8 x 9.5mm|1 x Drill/Countersink for No. 10 x 12.7mm|1 x Plug cutter 9.5mm (3/8 inch)|1 x Plug cutter 12.7mm (1/2 inch)
12 months
