The Makita DLX2455TJ Two piece kit contains Combi Drill DHP486 and Impact Driver DTD172
The Makita DLX2455TJ Brushless Twin Pack consists of the DHP486 Combi Drill with all-metal gear construction and the DTD172 Impact Driver with 1/4 Inch hex drive. The DHP486 Combi Drill has 21 torque settings and 2-speed settings for a controlled drilling experience, tailor-made to each application. A brushless motor ensures a long and maintenance-free tool life. The DTD172 Impact Driver has a compact tool body with a shorter overall length of 114mm and an electronic 4-stage impact power selection. They come with 2 x 5.0Ah Batteries, a Charger and a Makpac Type 3 Connector Case.
Features:
DHP486:
- Forward / reverse rotation
- Single sleeve keyless chuck allows for easy bit installation/removal by one hand
- Electric brake
- 2 mechanical gears
- Variable speed control by trigger
- Best possible ergonomic handle for drill-driver applications
- Brushless motor
- LED job light
- All-metal gear construction
- Metal gear housing
DTD172:
- Electric brake
- Variable speed control by trigger
- Reverse switch
- Quick mode switching button
- LED job light with pre-glow and after glow function
- Slim tool body
- Anti-bit-wobbling structure
- Ergonomically designed handle
Comes With:
- 2 x Belt Clips
- Side Handle and Depth Stop for Combi Drill
- 2 x 5.0Ah Batteries
- DC18RC Charger
- Makpac Case
Specification:
DHP486:
- Chuck Capacity: 1.5 - 13 mm
- No Load Speed (Hi): 0 - 2,100 rpm
- No Load Speed (Lo): 0 - 550 rpm
- Blows per Minute (Hi) - ipm: 0 - 31,500 ipm
- Blows per Minute (Lo) - ipm: 0 - 8,250 ipm
- Voltage: 18V
- Max. in wood: 76 mm
- Max. in masonry: 16 mm
- Max. in steel: 13 mm
- Torque Settings: 21 + Drill
DTD172:
- Standard Bolt: M5 - M16
- High Tensile Bolt: M5 - M14
- Coarse thread (length): 22 - 125 mm
- Max Fastening Torque: 180 Nm
- Blows per Minute (Max) - ipm: 0 - 3,800 ipm
- Driving Shank: 6.35mm 1/4" Hex