Makita DLX2145TJ 18V Combi Drill & Impact Driver Twin Pack (2 x 5.0Ah Batteries)

SKU: MAK-DLX2145TJ
(No reviews yet) Write a Review
£306.00
(£255.00 ex VAT)
Adding to basket… The item has been added

This 2 piece Makita set from the 18V range is made up of two of their bestsellers; the DHP458 combi drill and DTD152 impact driver

This 2 piece cordless kit from Makita consists of the DHP458 Combi Drill and the DTD152 Impact Driver. Also included are 2 x BL1850 5.0Ah batteries, a DC18RC Charger and a Type 3 Makpac Connector Case. The DHP458 Combi Drill is a robust all-rounder with an overall length of 225mm and equipped with XPT (eXtreme Protection Technology) essential in harsh outdoor environments as it gives added protection against dust and dripping water. With side handle and depth stop. The DTD152 is a compact Impact Driver with an overall length of only 137mm. Although small it is packed with features like 0-3500 impacts per minute and bright twin LED job lights for working in dark conditions. It also has an all-metal gearbox for long life and a soft-grip handle designed to maximise thrust right to the bit.

DHP458 Features:

  • Compact design, only 225mm overall length
  • 2 speed all metal gearbox - extra high transmission durability
  • High operational efficiency with high torque
  • Enhanced dust and drip-proof performance for use in outdoor applications or harsh environments
  • Single sleeve keyless chuck allows for easy bit installation/removal by one hand
  • Twin LED Job light with pre-glow and afterglow functions
  • The power remaining in the battery can be indicated in 3 stages simply by pushing a button; 3 lights on: more than 50% of full battery capacity. 2 lights on: 20% to 50% of full battery capacity. 1 light on: less than 20% of full battery capacity

DTD152 Features:

  • Electric brake
  • Mechanical 2-speed control
  • Variable speed control trigger
  • Forward/reverse rotation
  • Twin LED job light
  • One-touch bit installation
  • Ergonomic soft-grip handle
  • Compact overall length of 137mm
  • Lightweight design
  • Battery protection circuit
  • All metal gears

Comes With:

  • 2 x 5.0Ah batteries
  • DC18RC charger
  • Makpac Type 3 Connector Case

DHP458 Specification:

  • Max. in masonry: 16 mm
  • Max. in steel: 13 mm
  • Max. in wood: 65 mm
  • Blows per Minute: 0-30000/6000 bpm
  • No Load Speed: 0-2000/400 rpm
  • Max Torque S/H: 58 / 91 Nm
  • Torque Settings: 21 + drill
  • Vibration: Drilling: 9.5 m/sec_
  • Vibration K factor: 1.5 m/sec_
  • Net weight: 2.3 kg

DTD152 Specification:

  • Driving Shank: 6.35mm (1/4") Hex
  • Machine Screw: M4-M8
  • Impacts per Minute: 0 - 3,500 ipm
  • Standard Bolt: M5-M16
  • High Tensile Bolt: M5-M12
  • Coarse thread (length): 22 - 125 mm
  • Noise sound pressure: 93 dB(A)
  • Noise sound power: 104 dB(A)
  • Noise K factor: 3 dB(A)
  • No Load Speed: 0 - 2900 rpm
  • Max Fastening Torque: 165 Nm
  • Vibration: Fastening Bolt: 10.5 m/sec_
  • Vibration K factor: 1.5 m/sec_
  • Net weight: 1.5 kg