For use with T5 and other compatible routers. Comprises a 1/8 inch down cut spiral router cutter Ref. S55/02LHX1/4STC, guide bush and inlay collar. |By following a template and then removing the collar, an inlay pocket can be routed with matching inlay. |1/4 inch shank solid carbide router cutter.|A Unibase may be required for certain makes & models of router including Trend T4E.
Specification:
Guide bush ID=4.8 mm|Guide bush OD=7.9 mm|Collar OD=14.28 mm|Cutter D=1/8 inch|Cutter D=3.2 mm|Cutter C=1/2 inch|Cutter C=12.7 mm|Cutter OL=50.8 mm|Shank Diameter=1/4 inch
1 x Spiral down cut cutter 3.2mm x 12.7mm cut|1 x Guide bush 7.94mm dia|1 x Inlay collar 7.93mm to 14.3mm dia
Specification:
Guide bush ID=4.8 mm|Guide bush OD=7.9 mm|Collar OD=14.28 mm|Cutter D=1/8 inch|Cutter D=3.2 mm|Cutter C=1/2 inch|Cutter C=12.7 mm|Cutter OL=50.8 mm|Shank Diameter=1/4 inch
1 x Spiral down cut cutter 3.2mm x 12.7mm cut|1 x Guide bush 7.94mm dia|1 x Inlay collar 7.93mm to 14.3mm dia
12 months
