Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.|Offers better plunge cutting characteristics than TCT.|Many more re-sharpenings can be obtained from STC tools.|A harder grade of carbide is used as the tool is not brazed.|Two flute - finer finish.
Specification:
D=1/2 inch|D=12.7 mm|C=32 mm|OL=77 mm|Shank Diameter=1/2 inch
Specification:
D=1/2 inch|D=12.7 mm|C=32 mm|OL=77 mm|Shank Diameter=1/2 inch
12 months
