Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up.|For use with smaller routers where application allows.|Neatly cuts grooves on doors or frames to accept a weatherseal.|Groove can be positioned in bottom of a rebate.
Specification:
D=34 mm|C=2.8 mm|OL=55.3 mm|B=20 mm|Shank Diameter=1/4 inch
Specification:
D=34 mm|C=2.8 mm|OL=55.3 mm|B=20 mm|Shank Diameter=1/4 inch
12 months
