Trend Snappy Drill Bit Guide Set - for No6, 8 & 10 Gauge Screws|The essential drill bit guide set for all common countersink sizes from N06 to No10 gauge, complete with No2 Philips and No2 Pozi 50mm long screw driver bits|Makes perfectly centralised pilot holes when fitting countersunk hinges and other ironmongery.|Eliminates any problems of off set screws, misalignment of fittings or screwheads sticking up, for professional, consistent flush fitting results every time.|Makes the correct sized pilot holes for any fitting that requires No6, 8 or 10 gauge screws.|Direct fit to Trend Snappy Chucks for fast, efficient working practice and quick swaps between accessories.
Specification:
Shank Diameter=1/4 inch hex|D=2 mm (5/64")|D=2.75 mm (7/64")|D=3.5 mm (9/64")|Screw size=No.6 (3.5 mm)|Screw size=No.8 (4.0 mm)|Screw size=No.10 (5.0 mm)
1 x Drill bit guide 5/64"|1 x Drill bit guide 7/64"|1 x Drill bit guide 9/64"|1 x No. 2 Pozi 50mm screwdriiver bit|1 x No. 2 Phillips 50mm screwdriiver bit
Specification:
Shank Diameter=1/4 inch hex|D=2 mm (5/64")|D=2.75 mm (7/64")|D=3.5 mm (9/64")|Screw size=No.6 (3.5 mm)|Screw size=No.8 (4.0 mm)|Screw size=No.10 (5.0 mm)
1 x Drill bit guide 5/64"|1 x Drill bit guide 7/64"|1 x Drill bit guide 9/64"|1 x No. 2 Pozi 50mm screwdriiver bit|1 x No. 2 Phillips 50mm screwdriiver bit
12 months
