Self-guiding cutters for rounding over edges do not require a side fence. |They are supplied with two bearings. |Use the larger bearing for a round-over. |If the cutter is lowered, a top quirk can be produced. |Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
Specification:
D1=2 1/2 inches|D1=63.5 mm|C=1 1/4 inches|C=32 mm|B=9.5 mm|R1=1 inches|R1=25.4 mm|OL=88.5 mm|Shank Diameter=1/2
Specification:
D1=2 1/2 inches|D1=63.5 mm|C=1 1/4 inches|C=32 mm|B=9.5 mm|R1=1 inches|R1=25.4 mm|OL=88.5 mm|Shank Diameter=1/2
12 months
