Self-guiding cutters for rounding over edges do not require a side fence. |They are supplied with two bearings. |Use the larger bearing for a round-over. |If the cutter is lowered, a top quirk can be produced. |Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
Specification:
D1=51 mm|C=1 inches|C=25 mm|B=9.5 mm|R1=3/4 inches|R1=19.1 mm|OL=75 mm|Shank Diameter=1/2
Specification:
D1=51 mm|C=1 inches|C=25 mm|B=9.5 mm|R1=3/4 inches|R1=19.1 mm|OL=75 mm|Shank Diameter=1/2
12 months
