Template thickness should be at least 5mm thicker than cutter cut length of cutter. |Approximately 1.0mm flat will be found on the nose.
Specification:
D=1/2 inch|D=12.7 mm|C=12.7 mm|B=12.7 mm|A=45 degrees|OL=63.31 mm|Shank Diameter=1/4 inch
Specification:
D=1/2 inch|D=12.7 mm|C=12.7 mm|B=12.7 mm|A=45 degrees|OL=63.31 mm|Shank Diameter=1/4 inch
12 months
