Template thickness should be at least 5mm thicker than cutter cut length of cutter. |Approximately 1.0mm flat will be found on the nose.
Specification:
D=1/2 inch|D=12.7 mm|C=16 mm|B=12.7 mm|A=60 degrees|OL=66.61 mm|Shank Diameter=1/4 inch
Specification:
D=1/2 inch|D=12.7 mm|C=16 mm|B=12.7 mm|A=60 degrees|OL=66.61 mm|Shank Diameter=1/4 inch
12 months
