Machining of this joint is carried out by routing one piece with the inside face on the table. |The matching corner inside face is machined upright against the fence. |Make sure that the cutter is centred on the workpiece. The cutter can also be used for a glue joint, for joining lengths together. |Ideal for speaker cabinets and drawer construction.|Please note. |These tools cannot be re-sharpened. |Inverted use only.|Use on MDF and natural timbers.
Specification:
D=68 mm|C=30 mm|C2=12.5 mm|A=45 degrees|OL=77.5 mm|Shank Diameter=1/2 inch|Timber thickness min.=15 mm|Timber thickness max.=25 mm|For stationary machines at max. recommended speed 16,000 RPM
Specification:
D=68 mm|C=30 mm|C2=12.5 mm|A=45 degrees|OL=77.5 mm|Shank Diameter=1/2 inch|Timber thickness min.=15 mm|Timber thickness max.=25 mm|For stationary machines at max. recommended speed 16,000 RPM
12 months