Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF.|For use in a router table only. |Take several passes, increasing the depth with each pass.|Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF.|Stationary use only.|Can be used for curved panels if a copy pin is used.
Specification:
D=50 mm|D2=16 mm|C=12 mm|R=12 mm|OL=50 mm|Shank Diameter=1/2 inch
Specification:
D=50 mm|D2=16 mm|C=12 mm|R=12 mm|OL=50 mm|Shank Diameter=1/2 inch
12 months
