Self-guiding trimmers with bearings mounted on end of cutter. |For trimming plastic or plywood overlay. |For copy profiling, use the bearing to follow a template or base edge of board. |An approximate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing.
Specification:
D=3/4 inch|D=19.1 mm|C=2 inches|C=51 mm|OL=116 mm|B=19.1 mm|Shank Diameter=1/2 inch
Specification:
D=3/4 inch|D=19.1 mm|C=2 inches|C=51 mm|OL=116 mm|B=19.1 mm|Shank Diameter=1/2 inch
12 months
