Profiler with shank mounted bearing guides.|For use with router mounted above or below a table when following a template. |For profiling and rebating applications only. |Not for plunge cutting/grooving. |A 3mm maximum overlap should be left before trimming. |They are ideal for template making.
Specification:
D=3/8inch|D=9.5 mm|C=1 1/4 inch|C=32 mm|OL=74 mm|B=12.7 mm|A=90 degrees|Shank Diameter=1/4 inch
Specification:
D=3/8inch|D=9.5 mm|C=1 1/4 inch|C=32 mm|OL=74 mm|B=12.7 mm|A=90 degrees|Shank Diameter=1/4 inch
12 months
