These tools produce the same type of joint & use the same components as the combination PSC sets.|Both parts of the joint are cut by only changing the cutter height.|No reassembly of parts is required, to convert the tool from scribing mode to profiling mode and vise-versa.|Router table use only.
Specification:
D=41 mm|C=11 mm|C2=6.3 mm|B=22 mm|R=4 mm|OL=87 mm|Shank Diameter=1/2 inch|Timber thickness min.=18 mm|Timber thickness max.=22 mm|For stationary machines at max. recommended speed 18,000 RPM
Specification:
D=41 mm|C=11 mm|C2=6.3 mm|B=22 mm|R=4 mm|OL=87 mm|Shank Diameter=1/2 inch|Timber thickness min.=18 mm|Timber thickness max.=22 mm|For stationary machines at max. recommended speed 18,000 RPM
12 months
