Attractive edge moulds. |A full corner bead can be produced by making a second pass at 90 degrees.
Specification:
D=1 1/32 inch|D=26 mm|D2=22 mm|C=5/8 inch|C=16 mm|B=15.9 mm|R=4.8 mm|OL=70.5 mm|Shank Diameter=1/4 inch
Specification:
D=1 1/32 inch|D=26 mm|D2=22 mm|C=5/8 inch|C=16 mm|B=15.9 mm|R=4.8 mm|OL=70.5 mm|Shank Diameter=1/4 inch
12 months