Attractive edge moulds.|A full corner bead can be produced by making a second pass at 90 degrees.
Specification:
D=7/8 inch|D=22.3 mm|D2=20 mm|C=35/64 inch|C=14 mm|B=12.7 mm|R=3.2 mm|OL=65.5 mm|Shank Diameter=1/4 inch
Specification:
D=7/8 inch|D=22.3 mm|D2=20 mm|C=35/64 inch|C=14 mm|B=12.7 mm|R=3.2 mm|OL=65.5 mm|Shank Diameter=1/4 inch
12 months
