A self-guided combination trimmer. |A 90 degree trim is obtained by engaging the bottom half. |A 45 degree trim is obtained by lowering the cutter. |A fine height adjuster is recommended when using this cutter. |A larger 20mm bearing will spread the wear of the cutting when 45 degree trimming.
Specification:
D=24 mm|C=6 mm|C2=5 mm|C3=6 mm|B=Fractionally larger than cutter dia|OL=55 mm|A=90 degrees, |A2=45 degrees|Shank Diameter=1/4 inch
Specification:
D=24 mm|C=6 mm|C2=5 mm|C3=6 mm|B=Fractionally larger than cutter dia|OL=55 mm|A=90 degrees, |A2=45 degrees|Shank Diameter=1/4 inch
12 months
