For biscuit jointing of timber, man-made fibre and particle board with the router. |The set includes three sizes of bearing which set the correct depth of cut for the three sizes available.|A slightly longer cut than the length of the biscuit is required to allow some lateral play for easy alignment during assembly.|A water based glue (PVA) is used with the biscuits which will expand as the moisture is absorbed.|Boards are simply clamped together until glue is cured.|For larger boards, biscuits can be doubled up by making two passes.
Specification:
D=40 mm|C=4 mm|B=15 mm|B2=19 mm|B3=23 mm|OL=63.5 mm|Shank Diameter=1/4 inch|Groove depths=8.5 mm, 10.5 mm & 12.5 mm|For biscuit sizes=No.0, 10 & 20
Specification:
D=40 mm|C=4 mm|B=15 mm|B2=19 mm|B3=23 mm|OL=63.5 mm|Shank Diameter=1/4 inch|Groove depths=8.5 mm, 10.5 mm & 12.5 mm|For biscuit sizes=No.0, 10 & 20
12 months
