To make round boxes, planters, barrels or other multi-sided components. |One side of the component is machined with the cutter.|Fast and accurate joint creation on timber.|For use in a router table.|Notch created by cutter provides a larger glueing area for optimal strength.|Strips of wood are cut as staves and glued together, once dry a plane is used to make component round.|For 6-sided or 12-sided boxes for material 20mm or 12mm maximum thickness.
Specification:
D1=41 mm|Cut length=22 mm|A=30/60 degrees|OL=56 mm|Shank Diameter=1/2 inch|Timber thickness max. 6-sided=20 mm|Timber thickness max. 12-sided=12 mm|For 6-sided box cut face side up.|For 12-sided box cut face side down.
Specification:
D1=41 mm|Cut length=22 mm|A=30/60 degrees|OL=56 mm|Shank Diameter=1/2 inch|Timber thickness max. 6-sided=20 mm|Timber thickness max. 12-sided=12 mm|For 6-sided box cut face side up.|For 12-sided box cut face side down.
12 months
