Self-guiding cutters for rounding over edges do not require a side fence. |They are supplied with two bearings. |Use the larger bearing for a round-over. |If the cutter is lowered, a top quirk can be produced. |Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece.
Specification:
D=44.5 mm|C=22 mm|B=9.5 mm|B2=12.7 mm|R=5/8 inch|R=16 mm|OL=72 mm|Shank Diameter=1/2 inch
Specification:
D=44.5 mm|C=22 mm|B=9.5 mm|B2=12.7 mm|R=5/8 inch|R=16 mm|OL=72 mm|Shank Diameter=1/2 inch
12 months
