Self-guiding cutters for rounding over edges do not require a side fence. |They are supplied with two bearings. |Use the larger bearing for a round-over. |If the cutter is lowered, a top quirk can be produced. |A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece.
Specification:
D=32 mm|C=16 mm|B=9.5 mm|B2=12.7 mm|R=9.5 mm|OL=55.5 mm|Shank Diameter=1/4 inch
Specification:
D=32 mm|C=16 mm|B=9.5 mm|B2=12.7 mm|R=9.5 mm|OL=55.5 mm|Shank Diameter=1/4 inch
12 months
