Shank mounted bearing follows template mounted on board surface. |It is advisable that the template is at least 5mm thicker than the cutter.
Specification:
D=35 mm|C=9/16 inch|C=14.3 mm|B=35 mm|R=6.3 mm|R2=10.3 mm|OL=68 mm|Shank Diameter=1/2 inch
Specification:
D=35 mm|C=9/16 inch|C=14.3 mm|B=35 mm|R=6.3 mm|R2=10.3 mm|OL=68 mm|Shank Diameter=1/2 inch
12 months
