Shank mounted bearing follows template mounted on board surface. |It is advisable that the template is at least 5mm thicker than the cutter.
Specification:
D=22 mm|C=1/2 inch|C=12.7 mm|B=22 mm|R=4 mm|R2=5.5 mm|OL=52 mm|Shank Diameter=1/4 inch
Specification:
D=22 mm|C=1/2 inch|C=12.7 mm|B=22 mm|R=4 mm|R2=5.5 mm|OL=52 mm|Shank Diameter=1/4 inch
12 months
