Four fluted up-cut spiral router cutter for acrylic plastic (cast or extruded). |Can be used to trim, rebate and surface. |Can be used to ramp plunge cut. |Will rout low melting point plastics with shallow passes (not plunge cutting or surfacing). |Use in a router table. |Recommended speed 18,000 rpm.
Specification:
D1=1/2 inch|D1=12.7 mm|C=45 mm|Shank Diameter=1/2 inch|OL=103 mm
Specification:
D1=1/2 inch|D1=12.7 mm|C=45 mm|Shank Diameter=1/2 inch|OL=103 mm
12 months
