Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions.|Offers better plunge cutting characteristics than TCT.|Many more re-sharpenings can be obtained from STC tools.|A harder grade of carbide is used as the tool is not brazed.|Single flute - faster feed rates.|Single flute cutters should not be used in eccentric chucks.
Specification:
D=1/4 inch|D=6.3 mm|C=10 mm|OL=52 mm|Shank Diameter=1/4 inch
Specification:
D=1/4 inch|D=6.3 mm|C=10 mm|OL=52 mm|Shank Diameter=1/4 inch
12 months
