Eccentric single flute cutters. |Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. |Cutters with prefix S are Solid Carbide. |Small diameter tools must be handled with care to avoid breakage. |Single flute cutters should not be used in eccentric chucks.
Specification:
D1=3 mm|C=11 mm|OL=50 mm|Shank Diameter=1/4 inch
Specification:
D1=3 mm|C=11 mm|OL=50 mm|Shank Diameter=1/4 inch
12 months
