Eccentric single flute cutters. |Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. |Cutters with prefix S are Solid Carbide. |Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. |Small diameter tools must be handled with care to avoid breakage. |Single flute cutters should not be used in eccentric chucks.
Specification:
D1=1/16 inches|D1=1.6 mm|C=5 mm|OL=43 mm|Shank Diameter=1/4 inch
Specification:
D1=1/16 inches|D1=1.6 mm|C=5 mm|OL=43 mm|Shank Diameter=1/4 inch
12 months
