All-metal Pocket Hole Jig for drilling 9.5mm pocket holes in a range of material thicknesses. Twin 30mm centred pocket holes are ideal for large builds such as wardrobes, bookcases and cabinets. Can be bench-mounted for batch work or guides can be used independently for in-situ internal & external applications.|Full Length Hardened Drill Guide Bushes for long life and accurate drilling.|Material Thickness Gauge allows fast checking of material thickness without the use of a tape measure.|Drill Bit Setting Turret for setting the correct drill depth to the material thickness.|Work Support Rods prevent twisting when drilling longer material.|Removable Drilling guides allows the column to be used separately for repair applications.|Guide Locking Knobs lock the drilling guide in place once height has been adjusted.|Dust Collection Port efficiently clears dust and debris for faster, cleaner drilling.|On-Board Adjustable Clamp with quick-release mechanism.|Non-Marring Clamp Pad to prevent pressure marks on the workpiece.|T-Slot Clamp Guide supports the use of rail clamps to securely hold the jig to a work surface.|Countersink Screw positions allows the jig to be screwed to a base board for extra support.|Custom Carry Bag designed to optimise storage space.
Specification:
Material thickness min.=12.7 mm|Material thickness max.=38 mm|Material width min.=38 mm|Hole pitch=30 mm|Drill diameter=9.5 mm|Square drive bit size=No.2|Dust spout ID=30 mm|Underside T slot=12.2/8.4mm x 6mm|Drilling angle=15 degrees|Screw size=Fine No.7 x 30 mm|Screw sizes=Coarse No.7 x 25 mm, No.7/8 x 30 mm, No.8 x 38 mm, No.8 x 50 mm, No.8 x 63 mm
10 x No.7 x 25mm (1 inch) coarse|30 x No.7 x 30mm (1-1/4 inch) fine|30 x No.7/8 x 30mm (1-1/4 inch) coarse|10 x No.8 x 38mm (1-1/2 inch) coarse|10 x No.8 x 50mm (2 inch) coarse|10 x No.8 x 63mm (2-1/2 inch) coarse|1 x Face clamp|1 x HSS drill bit with collar|1 x 150mm Square drive bit|1 x Hex key 3mm A/F|2 x Workpiece support|1 x Carry case
Specification:
Material thickness min.=12.7 mm|Material thickness max.=38 mm|Material width min.=38 mm|Hole pitch=30 mm|Drill diameter=9.5 mm|Square drive bit size=No.2|Dust spout ID=30 mm|Underside T slot=12.2/8.4mm x 6mm|Drilling angle=15 degrees|Screw size=Fine No.7 x 30 mm|Screw sizes=Coarse No.7 x 25 mm, No.7/8 x 30 mm, No.8 x 38 mm, No.8 x 50 mm, No.8 x 63 mm
10 x No.7 x 25mm (1 inch) coarse|30 x No.7 x 30mm (1-1/4 inch) fine|30 x No.7/8 x 30mm (1-1/4 inch) coarse|10 x No.8 x 38mm (1-1/2 inch) coarse|10 x No.8 x 50mm (2 inch) coarse|10 x No.8 x 63mm (2-1/2 inch) coarse|1 x Face clamp|1 x HSS drill bit with collar|1 x 150mm Square drive bit|1 x Hex key 3mm A/F|2 x Workpiece support|1 x Carry case
12 months
