Multi-functional table top making jig.|Create accurate precise MFT style worktops quickly with a plunge router.|For router drilling 20mm holes at 96mm centres.|Made from Compact Grade High Pressure Laminate 12mm thick.|Two corner radii and 45 degree end cut.|Edge guides for initial rows, index pins for indexing for subsequent holes.|Recess aperture facility for desk tidy.|Jig requires:|A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.|A template guide bush with 30mm outside diameter ref. GB30/A.|A long series TCT plunge cut router cutter with 20mm diameter and 37mm cut length.|Two clamps.
Specification:
Hole centres=96 mm|Radii=50 mm & 100 mm|End cut=45 degrees|Size=298mm x 586mm|Weight=3 Kg|Guide bush=30 mm|Plunge router=1/2-inch|Cutter=20mm x 37mm cut with plunge cut|Clamps=Two|Please note|When using a jig there will be a cumulative error that cannot be avoided when indexing the jig on existing holes.
3 x Index pins|4 x Line up pins|1 x Foil tape 200mm x 50mm
Specification:
Hole centres=96 mm|Radii=50 mm & 100 mm|End cut=45 degrees|Size=298mm x 586mm|Weight=3 Kg|Guide bush=30 mm|Plunge router=1/2-inch|Cutter=20mm x 37mm cut with plunge cut|Clamps=Two|Please note|When using a jig there will be a cumulative error that cannot be avoided when indexing the jig on existing holes.
3 x Index pins|4 x Line up pins|1 x Foil tape 200mm x 50mm
12 months
