Enables mortise & tenons and dowel joints to be cut with a router. |Ideal for cabinet, chair and table.|CNC precision manufactured plates and body.|One set-up for both mortise and tenon giving perfectly fitting joints.|Fully adjustable for compound angle joints up to 45 degree.|Reversible templates to produce round and square end tenons. |Templates can be used for accurate dowelling applications.|Cuts mortise & tenon sizes of 6mm to 16mm.|Guide bushes are included but cutters are required.|A Unibase may be required for certain makes & models of router.|All tenons are cut with a 16mm diameter straight cutter (Ref. C025B). |The width of the tenon is adjusted by using different guide bush diameters.|International PCT Appl No. PCT/GB02/00253.|Jig requires:|A portable plunge router with 8 mm shank capacity.
Specification:
Material thickness min.=12 mm|Material thickness max.=47 mm|Tenon thickness min.=4.8 mm|Tenon thickness max.=16 mm|Tenon width max. using vertical guide+=90 mm|Tenon length max.++=Approx. 25 mm|Mortise length max. using vertical guide+++=90 mm|Angle tilt compound=-10 degree to 45 degrees|++ depends on cut length and plunge depth of the router.|+++unlimited if vertical guide removed and wood repositioned.
5 x Guide bushes sizes 15.9mm, 22mm, 26mm, 28mm & 32mm|1 x Metal guide bush 30mm|4 x Clamps|1 x Guide bush collar|1 x Set-up Bar metric scale
Specification:
Material thickness min.=12 mm|Material thickness max.=47 mm|Tenon thickness min.=4.8 mm|Tenon thickness max.=16 mm|Tenon width max. using vertical guide+=90 mm|Tenon length max.++=Approx. 25 mm|Mortise length max. using vertical guide+++=90 mm|Angle tilt compound=-10 degree to 45 degrees|++ depends on cut length and plunge depth of the router.|+++unlimited if vertical guide removed and wood repositioned.
5 x Guide bushes sizes 15.9mm, 22mm, 26mm, 28mm & 32mm|1 x Metal guide bush 30mm|4 x Clamps|1 x Guide bush collar|1 x Set-up Bar metric scale
12 months
