Makita HR4013C Rotary Hammer with SDS max and AVT, complete with carrying case, bit grease, depth rod and side handle
The Makita HR4013C was developed to provide higher operating efficiency and more comfort with unrivalled low level of vibration. Compared to the previous model HR4011C this machine gives 20% higher drilling efficiency and 45% higher chipping efficiency. With Rotary Hammer 4.5m/sec_ and Hammer 5.0m/sec_ vibration levels it makes this the worlds first 8 hour SDS-MAX rotary hammer.
Features:
- One touch sliding chuck for easy bit installation and removal
- Easy to operate operation-mode change lever. Located on the top of the motor housing for reduced possibility of breakage
- "Soft no load" function automatically reduces the motor speed during idling to suppress the vibration of the machine body
- Unrivalled low level of vibration aided by vibration absorbing housing
- LED service light indicates when to replace carbon brush
- In hammering mode, on/off switch is switchable between two switches to meet your application: For Continous or Intermittent chiseling applications
Comes with:
- Heavy duty carrying case
- Side handle
- Depth stop
- Grease tube
- Cloth
Specification:
- Impact energy: 8.0 J
- Max in concrete: 40 mm
- No Load Speed: 250 - 500 rpm
- Vibration - Chiselling: 4.5 m/sec_
- Vibration - Hammer Drilling: 5 m/sec_
- Vibration K factor: 1.5 m/sec_
- Impacts per minute: 1450 - 2900 ipm
- Input Wattage: 1000 w
- Net weight with pipes: 6.8 kg
