The Makita HR3001CJ SDS Plus Rotary Hammer with anti-vibration main handle
The Makita HR3001C 110V is a mains powered 30mm (1-3/16") rotary hammer with drastically increased drilling efficiency thanks to a redesigned hammering mechanism. It has been adapted for SDS-Plus bits with a powerful 1,050 watt motor with variable speed controlled by dial and a constant speed control, to deliver up to 4,500 ipm and 3.9 J impact energy for the most demanding applications. Also equipped with recessed lock-on button for continuous use, 3 mode operation for rotation only, hammering with rotation and hammering only. Fitted with a D shaped anti-vibration handle with rubberised soft grip for increased comfort in use and depth gauge for increased drilling consistency. Comes with a Depth Stop, Side Handle and a Makpac Case.
Features
- Double Insulation
- Variable speed
- Forward / reverse rotation
- Torque limiter
- Constant speed control
- 3-mode operation for "Rotation Only", "Hammering with Rotation" or "Hammering Only"
- Drilling efficiency drastically increased by redesigned hammering mechanism
- "No hammering when idling" function helps increase tool life
- Anti-vibration main handle
- Adapted for SDS-PLUS bits
- Depth Gauge
Comes With:
- Makpac Connector Case (Type 4)
- Depth stop
- Side handle
Specification:
- Impact energy: 3.9J
- Max in concrete (TCT bit): 30mm
- Max in concrete (TCT core): 80mm
- Max in concrete (Diamond core): 80mm
- Max in wood: 32mm
- Max in steel: 13mm
- Impacts per minute: 0 - 4500ipm
- Input Wattage: 1050w
- Vibration K factor: 1.5m/sec²
- Net weight: 4.1- 4.5kg
- No Load Speed: 0 - 840rpm
- Vibration (Chiselling): 11.0m/sec²
- Vibration (Hammer Drilling): 13.5m/sec²
- Noise sound pressure: 94dB(A)
- Noise K factor: 3dB(A)
- Noise sound power: 105dB(A)
- Shank: SDS PLUS
- Vibration (Drilling into metal): 6.0m/sec²
