Makita DLX2372TJ 18V LXT Rotary Hammer & Impact Wrench Twin Pack (2 x 5.0Ah Batteries)
The Makita DLX2372TJ Twin Pack consists of the DHR242 Rotary Hammer and the DTW300 Impact Wrench in a Makpac Connector Case with 2 x 5.0Ah Batteries and a DC18RC Charger. The Makita DHR242 is a high-performance SDS Plus Rotary Hammer with a fully brushless motor. Built for the most demanding tasks, it can drill up to 24mm in concrete with ease. The Makita DTW300 18V LXT Brushless 1/2 Inch Drive Impact Wrench is ideal for engineers and mechanics. It features a variable speed trigger and an electronic 4 stage impact power selection to suit a variety of applications.
DHR242 Features:
- Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
- One-touch slide chuck for SDS-plus bit
- Easy-to-grip handle ergonomically designed to: • give maximum power thrust. • provide a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- 3 mode operation • Rotation + Hammering • Hammering only • Rotation only
- The tool body is separated into the upper and lower housings at the foot of the handle portion where the houses are jointed with vibration absorbing cushion rubbers
- Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
- Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact
DTW300 Features:
- Electric brake
- Variable speed control by trigger
- Forward / reverse rotation
- LED job light
- Brushless motor
- Electronic 4 stage impact power selection
- Trigger switch with full speed mode: Variable speed mode can be changed to full speed mode simply by pushing a button. In full speed mode the trigger travel is shorter, the full speed is reached faster
- Auto-stop system available both in forward/reverse rotation modes
Comes With:
- 2 x 5.0Ah batteries
- DC18RC charger
- 1 x Belt hook
- 821552-6 Connector Case (Type 4)
DHR242 Specification:
- Capacity in Concrete: 24 mm
- Capacity in Steel: 13 mm
- Capacity in Wood: 27 mm
- Optimum Drilling Range: 4 - 16 mm
- Impact energy: 2.0 J
- Blows per minute: 0 - 4700 bpm
- No Load Speed (Hi): 0 - 950 rpm
- Vibration: Drilling: 3.5 m/sec²
- Vibration K factor: 1.5 m/sec²
- Vibration: Hammer Drilling: 13.5 m/sec²
- Vibration: Chiselling: 10.5 m/sec²
- Net weight: 3.2 - 3.7 kg
DTW300 Specification:
- Driving Shank: ½” Square Drive
- Standard Bolt: M10 – M20
- High Strength Bolt: M10 – M16
- Impact Power Selection: Max, Hi, Med, Soft
- Impacts per Minute: 0 - 4,000/ 3,400/ 2,600/ 1,800 ipm
- No Load Speed: 0 - 3,200/ 2,600/ 1,800/ 1,000 rpm
- Max Fastening Torque: 330 Nm
- Nut Busting Torque: 580Nm
- Net Weight: 1.5 – 1.8kg
- Vibration: 12.5m/s²
- Vibration K Factor: 1.5m/s²
- Sound Pressure Level: 97 dB(A)
- Sound Power Level: 108 dB(A)
- Sound K Factor: 3 dB(A)
