This tool kit set from Makita is made up of the DHP482 combi drill, DHR263 SDS plus rotary hammer, 4 x batteries, a charger and 2 x kit boxes
The Makita DLX2137PTJ Twin Pack contains two of the most popular cordless power tools along with two MakPac Carry Cases. Although the DHP482 is small it is packed with features like 21 different torque settings, hammer action and bright twin LED joblights for working in dark conditions. The DHR263 is extremely lightweight and compact yet maintains easy handling and high manoeuvrability. It features 40 different bit angle settings and 3 different operation modes making it suitable for a wide variety of applications.
DHP482 Features:
- Electric brake
- Mechanical 2-speed control
- Variable speed control trigger
- Forward/reverse rotation
- Twin LED job light
- Ergonomic soft grip handle
- Compact overall length of 198mm
- Single sleeve keyless chuck
- Lightweight design
- Battery protection circuit
- All metal gears
DHR263 Features:
- Powered by two 18V Li-ion batteries in series to supply energy to the powerful 36V DC motor drive system
- Compact design that maintains the same easy handling and high manoeuvrability as the BHR262
- LED Job light with pre-glow and afterglow functions
- 3 mode operation - Rotation + Hammering, Hammering only & Rotation only
- When different capacity batteries are used together (for example 3.0Ah and 4.0Ah), the machine stops when the battery with less capacity gets empty
- One-touch slide chuck for SDS-plus bit
- Ergonomic soft grip
- Battery capacity warning lamp
- 40 different bit-angle settings
Comes With:
- 4 x BL1850B 5.0Ah Batteries
- 1 x DC18RD Twin Charger
- 1 x 821551-8 MakPac Connector Case Type 3
- 1 x 821552-6 MakPac Connector Case Type 4
- Depth Stop
- Side Handle
- Bit Grease
- Belt Clip
DHP482 Specification:
- Battery Type: Li-ion
- Voltage: 18V
- Max. in Masonry: 13mm
- Max. in Steel: 13mm
- Max. in Wood: 38mm
- Max. Fastening Torque: S/H 36/62 Nm
- Chuck Capacity: 1.5 - 13mm
- Torque Settings: 21 + Drill
- No Load Speed Hi: 0 - 1,900rpm
- Low: 0 - 600rpm
- Blows per Minute Hi: 0 - 28,500bpm
- Low: 0 - 9,000bpm
- Weight: 1.8kg
DHR263 Specification:
- Voltage: 36v (18V x2)
- Max in concrete: 26mm
- Max. in steel: 13mm
- Max. in wood: 32mm
- Max in concrete (TCT core): 54mm
- Max in concrete (diamond core): 65mm
- Shank: SDS-PLUS
- Blows per minute: 0 - 4,800bpm
- No Load Speed: 0-1,200rpm
- Vibration K factor: 1.5m/sec²
- Vibration: Hammer Drilling: 14.5m/sec²
- Vibration: Chiselling: 14m/sec²
- Vibration: Drilling into metal: 3m/sec²
