With 45 degree angled wings.|For perfect mitre cuts of seals, mouldings, beadings and weatherseals. |Can be used to cut mouldings at 90 degrees up to 10mm thick.|For battens at 45 degrees the maximum thickness is 15mm and 35mm wide.|Left and right hand use.|With stop faces at 45 degree. Suited to mitre cuts in tiling sealing strips, wooden battens and decorative trim strips.|Engraved angle lines on both left and right alloy wings at 45 deg, 60 deg, 75 deg, 90 deg, 75 deg, 60 deg and 45 deg.|For use with wood, PVC, synthetic and leather.|Ideal for use with delicate dolls house mouldings.|Blade can be changed by using an 8mm A/F spanner.|Jaw locking lever.
Specification:
Max. thickness at 90 deg=10 mm|Max. thickness at 45 deg=15 mm|Max. width at 45 deg=35 mm|Max. length of cut at 45 deg=50 mm|OL=225 mm|D=75 mm|D2=80 mm|Weight=335 g|Restriction=Not to be sold to persons underage
Specification:
Max. thickness at 90 deg=10 mm|Max. thickness at 45 deg=15 mm|Max. width at 45 deg=35 mm|Max. length of cut at 45 deg=50 mm|OL=225 mm|D=75 mm|D2=80 mm|Weight=335 g|Restriction=Not to be sold to persons underage
12 months
