CraftPro honing guide (CR/DWS/HG)

CraftPro honing guide.|Ensure correct angle is maintained on bevel edge chisels and plane irons when used with diamond whetstone. |Roller with alloy body which self-centre clamps bevel edge chisels from 1/4 inch (6.35mm) to 1-1/4 (32mm) and plane irons up to 2- 9/16 inch (65mm) wide.|The setting device is marked for 25 degree and 35 degree angles. |Positive location for roller and blade. |Adjustable stop for setting blade angle. |Use with 63mm (2 1/2 inch) wide x 178mm (7 inch) long bench stones or workshop stones.|Not for use with Firmer chisels or short blade (Butt) chisels.

Specification:
Chisel blade width min.=6.35 mm|Chisel blade width max.=32 mm|Plane blade width max.=65 mm|Plane blade width min.=35 mm|Angle=25 deg & 30 deg|Thumb knob diameter=13 mm|Thumb knob slot=2 mm wide

1 x Honing guide

12 months