The Combination Router Base is a retro fit, quick change, multi-functional router base designed to:|Increase the overall versatility of the router.|Improve the quality of finish of every routing pass.|Reduce the possibility of error.|Increase stability during routing.|Increase the level of precision achieved.|Save set up time between tasks.|Save space on storing hand made jigs.|The CRB has seven functions - an offset baseplate, router compass from 19mm to 224mm radius, adjustable trenching with a clamp guide with 40mm micro adjustment, adjustable anti-tilt support, adjustable mortising of timber from 50mm to 200mm width, adjustable false panel groove copier and also enhances the Varijig frame system as an anti-tilt device when used with routers that can accept Euro style guide bushes (a special guide bush ref GB40/B is required).|The CRB will fit most routers with two 8mm, 10mm and 12mm fence rod holes at centres of 78mm to 130mm.|An accessory quick fit edge trimming base is available for trimming lipping up to 16mm wide and 6mm projection, ref. CRB/TB.|Larger circles can be accommodated by using ccessory extension rods ref. N/COMPASS/AEX to increase radius by 560mm.|Design Reg. No. 3003693.
Specification:
Rod size=8 mm|Rod centres= 78 mm to 130 mm|Mortising width min.=50 mm|Mortising width max.=200 mm|Anti-tilt height max.= 80 mm|Anti-tilt height min.= 20 mm|Lateral adjustment=110 mm|Micro adjustment=40 mm|One revolution=1.25 mm|Circle radius min.=19 mm|Circle diameter min.=38 mm|Circle radius max.=224 mm|Circle diameter max.=448 mm|Length=292 mm|Width=164 mm|Thickness=5 mm|Cutter diameter max. possible=40 mm. Please refer to router manufacturers specification
1 x Plastic baseplate with handle|1 x Bridge|2 x Rods 8mm dia x 270mm|1 x Bridge shim pack (2x2mm, 1x2mm, 1x1mm, 1x0.5mm)|1 x Pivot pin|1 x Pair of mortise pillars|
Specification:
Rod size=8 mm|Rod centres= 78 mm to 130 mm|Mortising width min.=50 mm|Mortising width max.=200 mm|Anti-tilt height max.= 80 mm|Anti-tilt height min.= 20 mm|Lateral adjustment=110 mm|Micro adjustment=40 mm|One revolution=1.25 mm|Circle radius min.=19 mm|Circle diameter min.=38 mm|Circle radius max.=224 mm|Circle diameter max.=448 mm|Length=292 mm|Width=164 mm|Thickness=5 mm|Cutter diameter max. possible=40 mm. Please refer to router manufacturers specification
1 x Plastic baseplate with handle|1 x Bridge|2 x Rods 8mm dia x 270mm|1 x Bridge shim pack (2x2mm, 1x2mm, 1x1mm, 1x0.5mm)|1 x Pivot pin|1 x Pair of mortise pillars|
12 months
