Use for bevelling, chamfering and for producing mortar grooves. |Approximately 1.0mm flat will be found on the nose.|Is ideal for imitating 'V' jointed tongue and groove on man-made board.
Specification:
D=22.28 mm|C=6 mm|C2=12 mm|A=30 degrees|OL=54.5 mm|Shank Diameter=1/2 inch
Specification:
D=22.28 mm|C=6 mm|C2=12 mm|A=30 degrees|OL=54.5 mm|Shank Diameter=1/2 inch
12 months
