This two wing self-guiding Tungsten Carbide Tipped slotting cutter is ideal for biscuit jointing.|The set is supplied with three ball bearing guides to suit the three sizes of biscuits available.|A slightly longer cut than the length of the biscuit is required for ease of alignment during assembly.
Specification:
D=37.2 mm|C=4 mm|B=12.7 mm|B2=16.0 mm|B3=19.0 mm|OL=64 mm|Shank Diameter=12 mm|Groove depths=9.05 mm, 10.6 mm & 12.25 mm|For biscuit sizes=No.0, 10 & 20
Specification:
D=37.2 mm|C=4 mm|B=12.7 mm|B2=16.0 mm|B3=19.0 mm|OL=64 mm|Shank Diameter=12 mm|Groove depths=9.05 mm, 10.6 mm & 12.25 mm|For biscuit sizes=No.0, 10 & 20
12 months
