Plastic sleeved for Corian cutters. |Refs. BNT/2 & BNT/5 are tapered. |Bearings are shielded to prevent penetration of dust and grease packed for life. |They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. |Scrape off any resin build-up.|Always check the tightness of the fixing screw before using cutter.
Specification:
B=20-21.8 mm|Bore=1/4 inch|Thickness=5.7 mm
Specification:
B=20-21.8 mm|Bore=1/4 inch|Thickness=5.7 mm
12 months
