Special high grade sub-micrograin carbide with very high tolerance grinding for smooth clean cut in aluminium.|Single O flute design for fast cutting. Increased feed rates allowing for more linear metres in less time.|Super high polished cutting edge with unique mirror finish, resulting in clean cuts, less chance for chip re-welding, effortless chip removal, a superior finish and a longer tool life.|Downcut for better clamping when machining small workpieces and improved finish on the tops of the board.|For use on routers and CNC routers.|Strongly recommended that a lubricant or coolant is used to prolong tool life.|Upcut spiral can be used to plunge cut. Downcut not recommended for plunge cutting unless ramped into workpiece.|Eject chips up or down depending on tool used.|Designed for aluminium, brass and copper and other non ferrous metals.|Can be used on Alupanel and Dibond.|
Specification:
D1=1/4 inches|D1=6.3 mm|C=5/8 inches|C=15.9 mm|OL=51 mm|Shank Diameter=1/4|Recommended speed=12,000-18,000 rpm
Specification:
D1=1/4 inches|D1=6.3 mm|C=5/8 inches|C=15.9 mm|OL=51 mm|Shank Diameter=1/4|Recommended speed=12,000-18,000 rpm
12 months