Multi-function jig for drilling 9.5mm pocket hole joints suited to both new and repair work. Lightweight glass-fibre reinforced nylon construction with full-length, hardened drill guide bushes. Unique drill depth setting system for fast set-up on materials from 12.7 to 38mm. Adjustable centres are ideal for narrow and wide stock, and detachable drill guides are perfect for narrow repairs in confined spaces.|Material Thickness Gauge allows fast checking of material thickness without the use of a tape measure.|Pre-set Depth Gauge adjusts the pocket position to suit the timber thickness.|Drill Bit Setting Gauge is used to set the correct drilling position for materials between 12.7mm and 38mm thick.|Full-Length Hardened Drill Guide Bushes for long life and accurate drilling.|Repositionable Drilling Guides allow the hole centres to be altered between 28mm and 50mm ensuring stronger joints in wider material.|Woodchip Relief Holes help protect against clogging inside the drilling guides.|Flip-Over End Stop allows the jig to hook over for an external joint or butt up to an edge for an internal joint.|Pocket Hole Guides can be removed and used as single pocket hole jigs for narrow stock or repairs.|Magnetic Clamp Position allows a face clamp to attach to the jig for easier repositioning.|Centering Plate Index for setting the drill guides to pre-set positions.|Glass Fibre Reinforced Nylon Body minimises weight whilst retaining strength.
Specification:
Material thickness min.=12.7 mm|Material thickness max.=38 mm|Hole pitch=28 to 50 mm|Drilling angle=15 degrees|Screw size=Fine No.7 x 30 mm|Screw sizes=Coarse No. 7 x 25 mm, No.7/8 x 30 mm, No.8 x 37 mm, No.8 x 50 mm, No.8 x 63 mm
10 x No.7 x 25mm (1”) coarse|10 x No.7 x 30mm (1-1/4 inch) coarse|10 x No.8 x 37mm (1-1/2 inch) coarse|10 x No.8 x 50mm (2 inch) coarse|10 x No.8 x 63mm (2-1/2 inch) coarse|1 x HSS drill bit with collar|1 x 150mm Square drive bit|1 x Adapter plate|1 x Hex key 3mm A/F|1 x Carry case
Specification:
Material thickness min.=12.7 mm|Material thickness max.=38 mm|Hole pitch=28 to 50 mm|Drilling angle=15 degrees|Screw size=Fine No.7 x 30 mm|Screw sizes=Coarse No. 7 x 25 mm, No.7/8 x 30 mm, No.8 x 37 mm, No.8 x 50 mm, No.8 x 63 mm
10 x No.7 x 25mm (1”) coarse|10 x No.7 x 30mm (1-1/4 inch) coarse|10 x No.8 x 37mm (1-1/2 inch) coarse|10 x No.8 x 50mm (2 inch) coarse|10 x No.8 x 63mm (2-1/2 inch) coarse|1 x HSS drill bit with collar|1 x 150mm Square drive bit|1 x Adapter plate|1 x Hex key 3mm A/F|1 x Carry case
12 months
